Surface analysis of plasma grafted carbon fiber

The surface characteristics of carbon fibers were studied by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and wetting measurements. The surface of carbon fiber was modified by means of plasma graft silsesquioxane. The oxygen/carbon and silicon/carbon ratio increased rapidly after treatments. Fitting the C 1s, O 1s, and Si 2p spectra demonstrated that new photopeaks were emerged, which were indicated C-Si, Si-O groups, respectively. The degree of surface roughness and the wettability of carbon fiber surface were both increased by plasma graft silsesquioxane. The results may shed some light on the design of the appropriate surface structure, which could react with resin, and the manufacture of the carbon fiber reinforced composites.     

Surface morphology studies on sublimation grown GaN by atomic force microscopy

Bulk single crystals and selectively grown gallium nitride (GaN) have been obtained using the sublimation technique. Crystals of size about 2–3 mm in length and 0.8–1.0 mm in width have been grown successfully. Atomic force microscopy has been employed to analyze the surface morphology of the as-grown samples to understand the growth mechanism. In free standing bulk GaN single crystals, two-dimensional growth is dominated by step growth mechanism. However, in the selective growth of GaN by sublimation, spiral growth originating from screw dislocation dominates.     

Comparative study of Pt, Au and Ag growth on Fe3O4(0 0 1) surface

The epitaxial growth of Pt, Au and Ag layers on Fe₃O₄(0 0 1) as a function of temperature and thickness have been studied. The layers were deposited by sputtering in an ultra high vacuum chamber and the structural properties were investigated by Reflection High Energy Electron Diffraction, X-ray reflectivity and diffraction, High Resolution Transmission Electron Microscopy and Atomic Force Microscopy. Our studies give evidence for three different growth behaviours depending both on the nature of the metals and the temperature. Comparison between the growth modes of the three metals will be discussed in relation with surface and interfaces energies.     

Study on orientation mechanisms of poly(vinylidenefluoride-trifluoroethylene) molecules aligned by atomic force microscopy

We have developed a molecular orientation control technique for polymers utilizing contact-mode atomic force microscopy (AFM). In this paper, we studied the molecular alignment mechanism of this technique by applying it to poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)). The resultant alignment and formed crystal size were strongly dependent on the temperature during the modification. They also depended on the scan line spacing of the modification. These results made the alignment mechanism clear. The obtained molecular alignment was stable against the heat treatment even at the temperatures just below T_m.     

Relation between the photoreaction of p-nitrobenzoic acid onto silver-coated filters and the surface roughness, as detected by SERS and AFM

The SERS of p-nitrobenzoic acid has been first obtained in Ag hydrosol and compared with those deriving from filtration of colloidal silver. The roughness of the Ag-coated filters has been examined by AFM measurements and related to the SERS enhancement. The addition of chloride anions to the colloidal suspension strongly increases the surface roughness of the solid metal substrates and activates the photoreaction of the adsorbate by irradiation with green laser light.     

Formation of CdS nanoclusters in phase‐separated poly(2‐hydroxyethyl methacrylate)‐l‐polyisobutylene amphiphilic conetworks

Nanophase‐separated poly(2‐hydroxyethyl methacrylate)‐l‐polyisobutylene (PHEMA‐l‐PIB) amphiphilic conetworks were obtained by crosslinking α,ω‐bismethacrylate‐terminated polyisobutylene (PIB) via copolymerization with silylated 2‐hydroxyethyl methacylate, followed by the hydrolysis of the silylether groups. Morphology development of a sample containing 64% PIB was monitored by means of transmission electron microscopy (TEM), atomic force microscopy (AFM), and small‐angle X‐ray scattering. For comparison, the morphology of a sample containing 53% PIB was investigated by AFM. The dry conetworks exhibited hydrophilic and hydrophobic phases with average 8–10‐nm domain sizes and were swellable in water as well as in heptane. Swelling amphiphilic conetworks with aqueous cadmium–chloride solution followed by exposure to H₂S resulted in nanosized CdS clusters located in the amphiphilic conetworks, that is, for the first time, new inorganic–organic hybrid materials composed of CdS semiconducting nanocrystals and PHEMA‐l‐PIB amphiphilic conetworks were prepared. © 2001 John Wiley & Sons, Inc. J Polym Sci B Part B: Polym Phys 39: 1429–1436, 2001     

Microscopic characterization of corrosion morphology: A study in specular and diffuse neutron reflectivity

Detailed morphologies of the exposed surface of a Ni film vis-à-vis a buried interface below it have been determined by diffuse (off-specular) neutron scattering (DNS) and specular neutron reflectometry (NR). The exposed surface shows distinct morphological changes with respect to the buried interface, due to corrosion. The results demonstrate the strength of DNS in obtaining morphology of hidden interfaces and exposed surfaces simultaneously.     

Characterization of a bioactive nanotextured surface created by controlled chemical oxidation of titanium

Events at bone-implant interfaces are influenced by implant surface properties. Our previous work has revealed that osteogenic activity is enhanced by a nanotextured Ti surface, obtained by controlled chemical oxidation using a H₂SO₄/H₂O₂ mixture. To better understand the origin of this biological effect, we have carried out a characterization of the modified surface at the nanoscale. In particular, the morphology, structure, and chemical composition of the Ti surface were examined thoroughly. X-ray photoelectron spectroscopy (XPS), combined with grazing-angle Fourier-transform infrared (FTIR) spectroscopy, revealed that the oxidized Ti surface consists of almost pure TiO₂ with Ti:O ratio ranging between 1:2.02 and 1:2.08. Raman spectroscopy and X-ray diffraction (XRD) indicated that the chemically treated Ti surface is mainly composed of amorphous titania. Scanning electron microscopy (SEM) clearly showed that the treated Ti substrate becomes highly porous and has a surface consisting of nano-sized pits, which have average diameters and fractal dimensions ranging between 20-22 nm and 1.11-1.17, respectively. Atomic force microscopy (AFM) revealed a three-fold increase in surface roughness. The thickness of the oxide layer on the treated Ti surface is estimated to be ∼32-40 nm. Together, these observations provide a detailed characterization of chemically oxidized Ti surfaces at the nanoscale and offer new prospects for understanding and controlling the relationship between the properties of materials and their interactions with cells. Our work brings us closer to the creation of “intelligent” implant surfaces, capable of selectively influencing cell behavior.     

Room temperature synthesis of water repellent silica coatings by the dip coat technique

The present paper describes the room temperature synthesis of dip coated water repellent silica coatings onto stainless steel substrates using 1,1,1,3,3,3-hexamethyldisilazane as a surface modifying agent. The hydrophobic property of the silica coating was enhanced by increasing its surface roughness, which was achieved by a proper control over the MeOH/TMOS molar ratio (S) during the synthesis. The contact angle of a water droplet (10 μl) increased from 72° to 145° with an increase in the S value from 9.1 to 36.4. The silica coating showed a minimum sliding angle of 15° for a water droplet of 10 μl. The water repellent silica coatings are thermally stable up to a temperature of 340 °C. The results have been discussed by taking into consideration the contact angle measurements, surface morphology and sol-gel parameters.